NFOmation.net - Your Ultimate NFO Upload Resource! Viewing NFO file: README.txt README.txt
By Roqy - 2009/10/01 - official release v0.8.2-1
www.roqy-bluetooth.net
Welcome to roqyBluetooth reality!
********
1st step : Install and upgrade the .deb (once!)
********
1- Transfert the .deb to your device (iphone/ipod touch)
2- Launch the mobile terminal (or install it with Cydia)
3- Type "dpkg -i roqyBT-x.y.z.deb" from the directory where you put the .deb (as root !)
4- Installation ok? Goooooooood!
5- restart your device !!! (press power 5s and slide the turn off button)
********
2nd step : get registered (if not already!)
********
You need to register the bluetooth stack, it is now done with the
graphical interface !
1- Launch the graphical interface
2- Go to the licence manager
3- Buy your licence with paypal (8 euros)
4- You should see your licence number below
5- Use automatic email to send the licence number or copy it to another email body
6- Licence request is to be sent to licence@roqy-bluetooth.net
7- Licence server will reply you within 24h after paypal confirmation
8- Enter the response in the Licence manager
9- The registration is done! Congrats!
Demo Licences are not valid for official release.
********
3rd step : play !
********
Play with your GPS!
1- Verify your GPS device is on, with a fix (10m from you max, outside!)
2- Verify your official bluetooth on iphone/ipod is off
3- Start roqyBT app (blue icon)
4- The stack is launched automatically, as the devices scanning
5- The devices are shown by their names. 5 devices max can be discovered at once.
6- Click on your GPS device name to connect with it!
7- First magic should come here, you should see your coordinate from the GPS device
(raw format, I'll upgrade that later)
8- If you have problem until here, please go to the forum
9- Close the graphical application, with the home button. Do not use Backgrounder!!!
10- Second magic should come here, you can launch your favorite GPS application, it will see
real GPS data from your device!
11- Close your application once your done
Stop playing with your GPS...
12- Launch roqyBT app, push on "Disconnect"
13- To turn off the bluetooth chip, slide the blue button from the main page (save power!)
!! Important !!
The stack is still running on the background when you close the app while connected to your
GPS. This is normal, as you will next launch your GPS favorite app.
So if you closed the graphical app without disconnection and without powering off your
bluetooth, it is running on the background! Just relaunch the graphical app to come back
to GPS info, then disconnect and turn off!
**************************************************************************************
UPDATE
release 0.8.2-1:
* Fix several bugs in discovery mechanisms
* Glossy icon, thanks to Bjoern
release 0.8.0:
* First official release!
* It's here, GPS injection is working!
* New licence manager
* Cleaned some bugs
* New icon without ugly black corners...
* Lot of small things updated
* What else ? ;-)
demo v7:
* Bug correction on graphical interface
* Bluetooth stack is ready for GPS data injection !! :)
demo v6:
* New graphical interface
* New bluetooth stack behavior, integrated to your iphone/ipod OS
* Licence management with graphical interface!
demo v5-2:
* add removed licence entry for new users
demo v5:
* Only debug !
* 2G full support
demo v4:
* iPhone 2G support
* less bug
demo v3:
* see devices names instead of addresses
* deep improvements of the stack
* less bugs
FAQ - Problems I've seen (best info on the forum!)
*** Working devices ***
iPhone 2G (1st gen)
iPhone 3G/S with OS 2.x and 3.x
iPod Touch 2G/3G with OS 3.0
*** devices under dev ***
none
*** Info from the GPS ***
You can see the raw info from your bluetooth GPS, so if you don't move and you see
a speed, it comes from your device, not my app! :)
*** Nothing is working anymore!***
You are stuck in a strange state... don't worry!
Close roqyBT app, see in sysinfo if roqyBluetooth is still alive.
Reboot your device if necessary.
*** Disconnect bluetooth ***
The disconnect for the device sometimes does not work correctly (the device
is not standard!!). So after a GPS session, if connect does not work you
need to reset the GPS device. My Holux GPSlim 236 does not need it,
my Nokia one does... I hate no standard device!
*** Software quality ***
Remember that I provide this software "as it". I work hard on quality, but it will
never be perfect.
See you!
Roqy
This NFO File was rendered by NFOmation.net
By Roqy - 2009/10/01 - official release v0.8.2-1
www.roqy-bluetooth.net
Welcome to roqyBluetooth reality!
********
1st step : Install and upgrade the .deb (once!)
********
1- Transfert the .deb to your device (iphone/ipod touch)
2- Launch the mobile terminal (or install it with Cydia)
3- Type "dpkg -i roqyBT-x.y.z.deb" from the directory where you put the .deb (as root !)
4- Installation ok? Goooooooood!
5- restart your device !!! (press power 5s and slide the turn off button)
********
2nd step : get registered (if not already!)
********
You need to register the bluetooth stack, it is now done with the
graphical interface !
1- Launch the graphical interface
2- Go to the licence manager
3- Buy your licence with paypal (8 euros)
4- You should see your licence number below
5- Use automatic email to send the licence number or copy it to another email body
6- Licence request is to be sent to licence@roqy-bluetooth.net
7- Licence server will reply you within 24h after paypal confirmation
8- Enter the response in the Licence manager
9- The registration is done! Congrats!
Demo Licences are not valid for official release.
********
3rd step : play !
********
Play with your GPS!
1- Verify your GPS device is on, with a fix (10m from you max, outside!)
2- Verify your official bluetooth on iphone/ipod is off
3- Start roqyBT app (blue icon)
4- The stack is launched automatically, as the devices scanning
5- The devices are shown by their names. 5 devices max can be discovered at once.
6- Click on your GPS device name to connect with it!
7- First magic should come here, you should see your coordinate from the GPS device
(raw format, I'll upgrade that later)
8- If you have problem until here, please go to the forum
9- Close the graphical application, with the home button. Do not use Backgrounder!!!
10- Second magic should come here, you can launch your favorite GPS application, it will see
real GPS data from your device!
11- Close your application once your done
Stop playing with your GPS...
12- Launch roqyBT app, push on "Disconnect"
13- To turn off the bluetooth chip, slide the blue button from the main page (save power!)
!! Important !!
The stack is still running on the background when you close the app while connected to your
GPS. This is normal, as you will next launch your GPS favorite app.
So if you closed the graphical app without disconnection and without powering off your
bluetooth, it is running on the background! Just relaunch the graphical app to come back
to GPS info, then disconnect and turn off!
**************************************************************************************
UPDATE
release 0.8.2-1:
* Fix several bugs in discovery mechanisms
* Glossy icon, thanks to Bjoern
release 0.8.0:
* First official release!
* It's here, GPS injection is working!
* New licence manager
* Cleaned some bugs
* New icon without ugly black corners...
* Lot of small things updated
* What else ? ;-)
demo v7:
* Bug correction on graphical interface
* Bluetooth stack is ready for GPS data injection !! :)
demo v6:
* New graphical interface
* New bluetooth stack behavior, integrated to your iphone/ipod OS
* Licence management with graphical interface!
demo v5-2:
* add removed licence entry for new users
demo v5:
* Only debug !
* 2G full support
demo v4:
* iPhone 2G support
* less bug
demo v3:
* see devices names instead of addresses
* deep improvements of the stack
* less bugs
FAQ - Problems I've seen (best info on the forum!)
*** Working devices ***
iPhone 2G (1st gen)
iPhone 3G/S with OS 2.x and 3.x
iPod Touch 2G/3G with OS 3.0
*** devices under dev ***
none
*** Info from the GPS ***
You can see the raw info from your bluetooth GPS, so if you don't move and you see
a speed, it comes from your device, not my app! :)
*** Nothing is working anymore!***
You are stuck in a strange state... don't worry!
Close roqyBT app, see in sysinfo if roqyBluetooth is still alive.
Reboot your device if necessary.
*** Disconnect bluetooth ***
The disconnect for the device sometimes does not work correctly (the device
is not standard!!). So after a GPS session, if connect does not work you
need to reset the GPS device. My Holux GPSlim 236 does not need it,
my Nokia one does... I hate no standard device!
*** Software quality ***
Remember that I provide this software "as it". I work hard on quality, but it will
never be perfect.
See you!
Roqy
This NFO File was rendered by NFOmation.net
